General specifications:

25-2010 INTEC 100mm diameter sand pouring apparatus (BS standards) - c/w 100mm sand pouring cylinder with shutter mechanism, 100mm calibration container and base metal tray.

25-2011 INTEC 150mm diameter sand pouring apparatus (BS standards) - c/w 150mm sand pouring cylinder with shutter mechanism, 150mm calibration container and base metal tray

25-2012 INTEC 200mm diameter sand pouring apparatus (BS standards) - c/w 200mm sand pouring cylinder with shutter mechanism, 200mm calibration container and base metal tray

25-2013 INTEC 6 inch (152mm) sand cone apparatus (ASTM standards) - c/w two cones with shutter mechanism, plastic sand container of 5 litres capacity and a density plate for 6 inch sand cone


Different models are available (ASTM standards) depending on the application of sand replacement method.

Accessories for soil density & field test:

25-2014 Scraper tool 25-2018 Club hammer

25-2015 Metal dibber tool 25-2019 Chisel

25-2016 Density spoon 25-2020 Steel pointer rod (16mm diameter)

25-2017 Density hand pick

Replacement parts:

25-2010/1 100mm diameter sand pouring cylinder

25-2010/2 100mm diameter calibration container

25-2010/3 Base metal tray for use with 100mm diameter sand pouring cylinder

25-2011/1 150mm diameter sand pouring cylinder

25-2011/2 150mm diameter calibration container

25-2011/3 Base metal tray for use with 150mm diameter sand pouring cylinder

25-2012/1 200mm diameter sand pouring cylinder

25-2012/2 200mm diameter calibration container

25-2012/3 Base metal tray for use with 200mm diameter sand pouring cylinder

25-2013/1 6 inch (152mm) sand cone with shutter mechanism

25-2013/2 Plastic sand container of 5 litres capacity

25-2013/3 Density plate for use with 6 inch sand cone apparatus